Split System Installation South Melbourne

Split System Install in South Melbourne

There’s nothing better than arriving home from a scorching 40-degree day, flipping on your split-system air conditioning, and in a matter of minutes your house and your family are cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. But , just like all heaters or coolers to make sure they’re running optimally, they need to be checked and maintained in a professional manner by qualified experts. Melbourne Gas Heating offers experienced technicians that know your split system air conditioners both inside and outside. They are experts in all makes and models of these units and give you assurance that they can get the job done in a professional manner.

We provide a range of services that include the following:

• Split System Installation South Melbourne
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and certified to handle all kinds of work. If you are looking for Split System Installation South Melbourne services then contact Local Heating and Cooling Professionals South Melbourne today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

Air conditioning splits earn the name because of one half of it (condenser) located outside the house while the other part (fan coil) is installed inside. When cooling, the warm air inside the room is brought in via the fan coil before being is then removed, which results in cool air being recirculated back into the home. While reverse cycle allows for your heat pump operate in reverse to provide heat during colder days.

Systems for split air conditioners can be installed to specific rooms, areas , or rooms joined by copper piping to an outdoor unit (condenser). Multi-head split air conditioning systems can be set up in up to nine rooms and only one outdoor unit, permitting an individual temperature control for each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating throughout the summer and winter seasons, the annual running cost would be $272.34.

Lowering Split System Operating Costs

It’s not hard to lower your running expenses with the Split System. The model you purchase, and it’s respective star rating will determine just how much you will save each year. It is important to look beyond the initial cost to how you utilize it Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat between 24C and 26C for cooling. Each degree less in summer will raise the cost of running by 10%..
• Utilize the economy setting when your split has one. Ensure that you regularly service your air conditioner.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds during the daytime. Close windows and doors to areas that are cooling when your split systems are operating.
• If the split system is shut off and the cooler outside, open the doors or windows and let cool air circulate.
• Insulate your house to block the cool summer air out and keep the heat in the winter months.
• Dress according to the weather.

Why Select Split Systems?

Wall mounted split air conditioning systems are the most frequently owned by homeowners who own a residential air conditioning system, as they are affordable and simple to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year as it maintains an even temperature, helps save costs (less energy consumption) and produces a lesser amount of sound when it is used. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted divided AC models are most affordable option for a one room, apartment or small house since they are inexpensive to purchase (depending on the number of indoor units you require) and they don’t require necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the area it is installed within, and each space may have different temperatures.

Air Quality

A lot of AC splits include air filtering and humidity control functions that regulate the amount of dust and humidity that can be found in the space. This provides those with sensitive skin (children and elderly, asthmatic or allergic customers) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to be connected to a single outdoor condenser that in turn provides you with satisfaction of having the ideal Air conditioner (in terms of physical and output constraints) for a particular room.

Split System FAQ

Is a split system the same as an air conditioner?

It is true that Split System can be described as an air conditioner system. But, the different kinds of air conditioning systems. It that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All of them operate on electricity & refrigerant under the same principal but very different in terms of how they are installed.

How long does it take to install a split system air conditioner?

In general the typical AC split installation should be completed in 3-6 hours. The exact length of time can vary based upon a number of variables, including below;

• The size and location of both the outdoor and indoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Do I need to replace or fix the air conditioning unit in my home?

In the majority cases in the event that your air conditioner is more than 10 years old and you have obvious issues with your AC, there is a good chance that it’s cheaper to replace rather than fix.

In order to help you make the right choice for your needs, contact the experts at ComfyHome for an honest evaluation of the condition of your air conditioner.

What size split system air conditioning do I need?

A typical measuring ratio will multiple the space by a ratio of 0.15 in order to determine the power of the unit in kilowatt.

For a room area of 40 square meters, you will require a split system air conditioning unit that is 6 kW. An air conditioning unit of 2.5kW is perfect for 10-20 square meter room areas.

However, the amount of the Split system’s air conditioning will also be affected by other variables such as how well the insulation is in place, the quantity of residents and’ position.

To get an accurate estimate of the Split unit size, please contact us for a comprehensive analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general air conditioners are built to last 10-20 years, on average. But it depends on heaps of factors such as the manufacturer of the air conditioner, quality of the installation, regular service history, etc…

It is vital to check the maintenance of your split system air conditioner frequently to extend its lifespan and improve effectiveness.

What is the best frequency to wash the air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly recommended to take care to clean your air conditioning filter every two weeks to improve the efficiency of your system and possibly reduce energy consumption by 5 to 15 percentage.

South Melbourne Gas Heating Services

• Evaporative Cooling Repair South Melbourne
• Gas Heating Repairs South Melbourne
• Ducted Gas Heating Servicing & Repair South Melbourne
• Gas Heating South Melbourne
• Gas Heating Service South Melbourne
• Gas Appliance Servicing & Repair South Melbourne
• Braemar Ducted Gas Heating Servicing & Repair South Melbourne
• Vulcan Ducted Gas Heating Servicing & Repair South Melbourne
• Brivis Ducted Gas Heating Servicing & Repair South Melbourne
• Gas Heating Installation South Melbourne
• Gas Space Heater Repair South Melbourne
• Gas Log Fire Service & Repairs South Melbourne
• Carbon Monoxide Testing South Melbourne
• Gas Hot Water System Installation & Repairs South Melbourne
• South Melbourne

What Types of Systems We Service & Repair

Each type and brand of heating requires its own maintenance and operation Our highly skilled technicians are knowledgeable and experience to offer the best service across all kinds of heaters, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance, specialising in all styles and models of heating systems. We pride ourselves on having a quick response time and commitment to efficiency, excellence and reliability.

We can service and maintain the leading brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Request a Quote with No obligation

Our Promise To You

At Melbourne Gas Heating we understand the inconvenience of not having any hot water. It’s a situation we do not believe anyone should be forced to endure. That’s why we give an emphasis for hot water emergencies. Our experienced plumbers are reliable and friendly We will be able to help with any emergency.

We take pride in our customer service and it is our belief that the tiny things are the most important.

We pride ourselves on our great customer service, this is why our customers are so happy with us:

• We will always be there when we promise to be there.
• Our technicians will give you an appointment when they are 30 minutes away.
• Pricing upfront competitive and guidance before we begin the work.
• Always cleaning up after us.

At Melbourne Gas Heating offer emergency and maintenance services for plumbing, heating, and electrical. If you have questions about our services and the products we provide, we are here to help.