Split System Installation Balwyn

Split System Install in Balwyn

There’s nothing better than coming home from a scorching 40-degree day, switching on your split system air conditioning and in a matter of minutes the house and your family are cool.

Split system air conditioning offers this versatility, making them hard to beat. But , just like all heaters or coolers to make sure they’re running at their peak they must be maintained and serviced to a high standard by skilled professionals. Melbourne Gas Heating offers experienced technicians who know split system air-conditioners from top to bottom. They specialize in all brands and models of these units giving you the peace of mind that we can get the job done to professional standards.

We provide a variety of services that comprise the following:

• Split System Installation Balwyn
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are fully qualified and licensed for all sorts of jobs. If you’re looking for split system installation Balwyn services then contact Local Heating and Cooling Professionals Balwyn today and talk to one of our knowledgeable team members.

How Do Split Systems Function?

Air conditioning splits are their name due to half it (condenser) is located outside of the house , while the second part (fan coil) is installed inside. While cooling, hot air that is inside the room is brought in through the fan coil before being taken out, resulting into cool air recirculating back into the house. The reverse cycle permits that the heating system to operate in reverse to provide heat in cold weather.

Split air conditioning systems are installed in individual rooms, zones or rooms that are connected via copper pipes connecting to the outdoor unit (condenser). Split air conditioners with multiple heads are able to be fitted for more than nine rooms using only one outdoor unit permitting the control of temperature for each room.

What Are The Running Costs With Split Systems?

One of the top brands for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the winter and summer periods, the annual running cost will be $272.34.

Reducing Split System Running Costs

It’s not difficult to lower your running expenses by using a Split System. Depending on the model that you purchaseand its star rating will determine just how much you can save annually. It is important to look beyond the initial price to how you make use of your Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat between 24C and 26C for cooling. Each degree less in summer will increase your running costs by 10%..
• Use the economy setting when your split has one. You should also regularly maintain your air cooling system.
• Keep the sun’s heat out by closing the curtains and exterior blinds in the morning. Close doors and windows to areas being cooled when it is split on.
• When the split system is shut off and the cooler outside, open the doors or windows and let the cool air in.
• Insulate your residence to prevent the warm summer days out and cool in the winter months.
• Dress appropriately for the weather conditions.

Why Choose Split Systems?

The wall mounted air conditioning system is the most frequently owned residential air conditioning system because they are cost-effective and easily to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year as it maintains an even temperature, helps save costs (less consumption of energy) and creates a lot less noise when used. This is accomplished by setting the speed of rotation more precisely.

Affordable

Wall-mounted Split AC systems are the best budget option for a small room apartment or small house as they are relatively cheap to buy (depending on how many indoor units you’ll need) and don’t need duct work required.

Independent Temperature Control

Each indoor unit is able to control the temperature of the room it is installed in, which means that each room can have a various temperature.

Air Quality

Many HVAC systems that are split have air filtering functions and humidity control which control the amount dust and humidity within a room. This can provide those with sensitive conditions (children or elderly, asthmatic or allergic users) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser, which gives you the convenience of having the perfect Air conditioner (in terms of output and physical restrictions) for a particular room.

Split System FAQ

Is a split system the same thing as the air conditioning?

Absolutely, Split System can be described as an air conditioner system. There are various kinds of air conditioning systems. It includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates on electricity & refrigerant under the same principles, however they are different in terms.

How long will it take to install a split-system air conditioner?

In general, a single split air conditioning system installation will take 3-6 hours. But, the exact amount of time will depend on a variety of factors, such as below;

• Location and size of both outdoor and indoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from the main switchboard up to the AC unit

More Split System FAQ's

Should I replace or repair my cooling system?

In most situation in the event that your air conditioner is more than 10 years and you have evident issues with the A/C, there is a good chance that it’s less expensive to replace it than to repair it.

In order to help you make the right decision, it is best to contact the experts at ComfyHome to get an honest and accurate assessment of the condition of your air conditioner.

What size of split system air conditioner will I require?

A typical measure ratio would be to multiple the space by a ratio of 0.15 to calculate the necessary power of the measurement unit in kilowatts.

For a room area of 40sqm, you should require a split system air conditioning unit of 6 kW. A unit that can cool the air at 2.5kW is suitable for 10 -20 sqm room spaces.

However, the amount of the Split system air conditioning required can also be affected by other variables like how well the insulation is in place, the number of occupants and residents’ place of residence.

To make an accurate determination of the Split Unit size we suggest that you contact us for a comprehensive analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general an air conditioner is built to last 10-20 years in the average. But this depends on a lot of elements, such as the brand of the A/C as well as the quality of the installation, routine service history etc…

It is essential to service Your Split System AC regularly for a longer life span and to increase efficiency.

What is the best frequency to wash my air conditioner air filter?

Based on Daikin Australia, it is strongly suggested that you should cleanse your air conditioning filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy consumption by 5 to 15 percentage.

Balwyn Gas Heating Services

• Gas Appliance Servicing & Repair Balwyn
• Gas Heating Balwyn
• Vulcan Ducted Gas Heating Servicing & Repair Balwyn
• Carbon Monoxide Testing Balwyn
• Balwyn
• Gas Heating Service Balwyn
• Gas Heating Installation Balwyn
• Braemar Ducted Gas Heating Servicing & Repair Balwyn
• Gas Space Heater Repair Balwyn
• Evaporative Cooling Repair Balwyn
• Gas Heating Repairs Balwyn
• Gas Hot Water System Installation & Repairs Balwyn
• Brivis Ducted Gas Heating Servicing & Repair Balwyn
• Ducted Gas Heating Servicing & Repair Balwyn
• Gas Log Fire Service & Repairs Balwyn

What Types of Systems We Service & Repair

Every brand and type of heating system has its own maintenance and operation; our experienced technicians are equipped with the expertise and expertise to provide top-quality services on all types of heating equipment, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in repairs and maintenance of heating systems and specialize in all types and brands of heating equipment. We pride ourselves on having a fast response time and dedication to excellence, efficiency , and reliability.

We are able to maintain and service the majority of top brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re personable and friendly
• Experienced & Licenced Team
• Get a Quote With No Costs

Our Promise To You

At Melbourne Gas Heating we understand the frustration of not having hot water. This is something that we would never want anyone to have to experience. This is why we put top priority on hot water emergencies. Our experienced plumbers are friendly and trustworthy and without doubt, we can assist with any emergency.

We pride ourselves on our customer service and it is our belief that the little things matter the most.

We are proud of our exceptional customer service. and here’s the reason our customers appreciate us:

• We always arrive when we say we will.
• Our staff will give you a call when they are 30 minutes away.
• Pricing upfront competitive and guidance before we even begin the job.
• Always cleaning up after our own mess.

Our company Melbourne Gas Heating offer emergency and maintenance services for electrical, plumbing and heating. If at any time you have some questions about our services, and the services we offer.